To ungroup a group object
(i) Select the grouped object using the Pick tool.
(ii) Choose Object > Group > Ungroup
(iii) Objects on the menu Bar. (or)
(iv) Press Ctrl + U in the keyboard (or)
(v) Click on the Ungroup Objects button on the Property Bar.
(vi) The grouped object will break into its component objects

To create a group object
(i) Select the objects with the Pick tool.
(ii) (To select multiple objects hold down Shift key while selecting them.)
(iii) Choose Object > Group > Group.
(iv) Objects (or) Press Ctrl + G. The selected objects will be grouped as a single object.

An artistic Media tool used in CorelDRAW were artistic brush, spray, and calligraphic effects.
 

Using the Start Menu
(i) Choose Start > All Programs > CoreIDRAW Graphics Suite 2018 > CoreIDRAW 2018.
(ii) The CorelDRAW 2018 - Welcome Screen window will appear.

To create a New Document
(i) Click on New Document button in the Welcome Screen window.
(ii) Now Create a New Document dialog box appears. It lets you specify a wide range of document properties.
(iii) You can name the document, set the page size, select a color mode such as CMYK or ROB, and set color profiles.
(iv) Click on OK button.

(i) By welding you can create irregular shapes.
(ii) The welded objects take on the outline and fill of the object that was selected last.
(iii) Welded objects can revert to their original individual objects only by using the Undo button.
To weld objects sing Property Bar
(i) Select the objects with the Pick tool by holding the Shift key.
(ii) Choose Object > Shaping > Weld in the menu bar (or)
(iii) Click on Weld button on the Property bar.
(iv) The objects will be welded and will become a single outline object.

Cloning Objects
(i) To create a clone of a selected object.
Choose Edit > Clone from the menu bar.
(ii) The clone will be offset slightly to the upper right of the original and placed on top as shown below. The new copy is automatically selected.
(iii) Cloning differs from duplication in that most changes made to the original object (the "master") are automatically applied to the clone.

To specify the Undo settings
1. Choose Tools > Options in the menu bar.
2. In the Workspace list of categories, click General
3. In the Undo levels area, type a value in one or both of the following boxes:
(i) Regular - specifies the number of actions that can be reversed when you use the Undo command with vector objects.
(ii) Bitmap effects - specifies the number of actions that can be reversed when you work with bitmap effects.
The keyboard shortcut is
(i) To Undo an action, press Ctrl + Z.

Creating Circles
(i) To draw a circle, select the Ellipse tool in the toolbox.
(ii) The mouse pointer changes to a crosshair with a small ellipse beneath it.
(iii) Click on anywhere in the drawing area and hold down the Ctrl key while dragging the mouse pointer.
(iv) Release the mouse button where you like the end of the circle.

Drawing a Rectangle
(i) To draw a rectangle, select the Rectangle tool in the toolbox. The mouse pointer changed to a crosshair with a small rectangle beneath it.
(ii) Click and drag anywhere in the drawing area. As you drag, a rectangle appears.
(iii) Release the mouse button when the rectangle is of the desired size.
(iv) Now a rectangle will appear on the screen.

CorelDRAW allows you fit a string of text to any path a straight or curved line, a rectangle, an ellipse, or another letter or text string.
To fit text to a path, use the Fit
Text to Path command in the Text menu.
(i) It becomes available only when you select both a text object and a non-text object at the same time.
(ii) A text string can be fitted to the "path" traced by the second object's outline, as shown in the following examples:
To fit text to a path: 
(i) Select the text object and the second object using the Pick tool and the Shift key.
(ii) Choose Fit Text To Path from the Text menu.
(iii) The text is redrawn along the path of the second object.
(iv) You can remove the path object with the Delete command when the text is positioned correctly.
To remove the path object
(i) Select the Shape tool and click on the path object.
(ii) Then Select the Pick tool and click on the path object.
(iii) Now press the Delete key. The path object is deleted.
Entering Text Directly onto a Path 
(i) Text can be entered directly onto most paths - curves, rectangles, ellipses, shapes, and stars.
To enter text directly onto a path 
(i) Using the Pick tool, select the path.
(ii) Choose Text> Fit text to path in the menu bar.
(iii) Move the text cursor over the outline, of the target shape. The pointer changes to the Fit text to path pointer.
(iv) Click on it.
(v) Type along the path.

Drawing Grids
Using Graph Paper tool, you can draw a grid and set the number of rows and columns. A grid is a grouped set of rectangles that you can break apart.
To draw a grid,
1. Click and hold the Polygon tool. A flyout menu will appear.
2. Select the Graph Paper tool from the flyout menu.
3. Now type values in the top and bottom portions of the Columns and rows box on the property bar. The value you type in the top portion of the Columns and rows box specifies the number of columns; the value you type in the bottom portion specifies the number of rows.
4. Click on anywhere in the drawing area where you want the grid to appear.
5. Drag diagonally to draw the required grid.
If you want to draw the grid from its center point outward, hold down Shift key as you drag; if you want to draw a grid with square cells, hold down Ctrl key as you drag.

Creating Polygons
1. To draw a polygon Cabo known as pentagon: a five-sided figure, select the Polygon tool in the toolbox. The mouse pointer changes to a crosshair with a small polygon beneath it.
2. Click on anywhere in the drawing area and drag the mouse pointer.
3. Release the mouse button where you like the end of the polygon.
4. To increase the number of sides of your polygon, select the polygon you have drawn using the Pick tool.
5. Place the mouse pointer on the Number of Points on Polygon text box and type the number of sides you like for you polygon. You can also set the number of sides for your polygon and then draw it.

To draw a spiral,
(i) Click and hold the Polygon tool. A flyout menu will appear.
(ii) Click on the Spiral tool from the flyout menu.
(iii) Now you should type a value in the Spiral revolutions box on the property bar to set the number of full-circle revolutions to appear in the new spiral object.
(iv) Next, click one of the following buttons on the property bar:
1. Symmetrical spiral
2. Logarithmic spiral
If you want to change the amount by which the spiral expands as it moves outward, move the Spiral expansion slide. Drag diagonally in the drawing window until the spiral is the required size.