11th Standard Syllabus & Materials
11th Standard
TN 11th Tamil இயற்கை வேளாண்மை,சுற்றுச்சூழல் -செய்யுள் - மனோன்மணீயம் Important Questions And Answers Study Material - QB365 Set A
NEW11th Standard
TN 11th Tamil என்னுயிர் என்பேன் -துணைப்பாடம் - இசைத்தமிழர் இருவர் Important Questions And Answers Study Material - QB365 Set A
NEW11th Standard
TN 11th Tamil மொழி கலை -செய்யுள் - ஒவ்வொரு புல்லையும் Important Questions And Answers Study Material - QB365 Set A
NEW11th Standard
TN 11th Tamil பீடு பெற நில் - இலக்கணம் - பகுபத உறுப்புகள் Important Questions And Answers Study Material - QB365 Set A
NEW11th Standard
TN 11th Tamil பீடு பெற நில் - துணைப்பாடம் - வாடிவாசல் Important Questions And Answers Study Material - QB365 Set A
NEW11th Standard
TN 11th Tamil பீடு பெற நில் - செய்யுள் - குறுந்தொகை Important Questions And Answers Study Material - QB365 Set A

Published on: 10/11/2020
11th Standard Physics English Medium Free Online Test 1 Mark Questions 2020 - Part Seven
Download Tamil Nadu 11th Standard Physics question papers, model tests, one-mark questions, important questions, and public exam papers in PDF format. Free study materials and answer keys for TN State Board students.
Questions + Answers key
Take MCQ Physics Test1.
An object is dropped from rest. Its v - t graph is ______________.




2.
The pressure on a square plate is measured by measuring the force on the plate and the length of the sides of the plate by using the formula p =\(F\over l^2\) .If the maximum errors in the measurement of force and length are 4% and 2% respectively, then the maximum error in the measurement of pressure is _________________
1%
2%
8%
10%
3.
One degree of arc is equal to_______
1.457\(\times\)102rad
1.457\(\times\)10-2rad
1.745\(\times\)102rad
1.745\(\times\)10-2rad
4.
Rate of change of momentum of an object is equal to _______________.
acceleration
work done
force
impulse
5.
Two bodies with kinetic energies in the ratio of 4: 1 are moving with equal linear momentum. The ratio of their masses is _______________.
4: 1
1:1
1:2
1:4
6.
A stationary particle explodes into two particles of masses m1 and m2, which move in opposite directions with velocities v1 and v2. The ratio of their kinetic energies E1/E2 is ______________
m2/m1
m1/m2
1
m1v2/m2v1
7.
A block of mass M is attached to the lower end of a vertical spring. The spring is hung from a ceiling and has force constant value k. The mass is released from rest with the spring initially unstretched. The maximum extension produced in the length of the spring will be ____________.
2Mg/k
4Mg/k
Mg/2k
Mg/k
8.
A long spring when stretched by 2 cm its potential energy is U. If the spring is stretched by 10 cm. then the potential energy of the spring is _______________.
\(\frac{U}{5}\)
5U
\(\frac{U}{25}\)
25U
9.
A projectile has initially the same horizontal component of velocity as it would acquire if it had moved from rest with uniform acceleration 1 ms-2? for half a minute. If it reaches the maximum height of 90 m, the angle of, projection is (g =10 ms-2).
tan -1\(({1\over \sqrt{5}})\)
tan -1\(({1\over \sqrt{2}})\)
tan -1\(({1\over \sqrt{3}})\)
tan -1\(({ \sqrt{2}})\)
10.
In an explosion, a body breaks up into two pieces of unequal masses. In this ____________.
both parts will have numerically equal momentum
lighter part will have more momentum
heavier part will have more momentum
both parts will have equal kinetic energy
11.
A particle is dropped from a height h. A constant horizontal velocity is given to the particle. Taking g to be constant everywhere, kinetic energy E of the particle with respect to time z is correctly shown in ____________.




12.
Unit of work is ____________.
watt
newton
joule
no unit
13.
Which of the following is the dimension of coefficient of friction?
[MLT-2]
[M0L0T0]
[M2LT-2]
[M2LT]
14.
A jet engine works on the principle of ______________.
conservation of linear momentum
conservation of mass
conservation of energy
conservation of angular momentum
15.
Which one of the following motions on a smooth plane surface does not involve force?
accelerated motion in a straight line
retarded motion is a straight line
motion with constant momentum along a straight line
motion along a straight line with varying velocity
16.
Which of the following force tends to stopthe moving object?
Frictional force
Magnetic force
Gravitational force
Electric force
17.
When a horse pulls a wagon, the force that causes the horse to move forward is the force?
the ground exerts on him
the exerts on the ground
the wagon exerts on him
the exerts on the wagon
18.
___________ system of units was accepted by the scientists of the general conference on weights and measures.
FPS
CGS
MKS
SI
19.
A shell, in flight explodes into four unequal parts. Which is conserved?
potential energy
momentum
kinetic energy
both a and c
20.
Water stored in a dam possesses _______________.
no energy
electrical energy
kinetic energy
potential energy
21.
If a circle with 10 m radius and angle 60° at centre, then what will be the length of arc?
5.24 m
6.21 m
7.1 mm
10 m
22.
When a mass is rotating in a plane about a fixed point, its angular momentum is directed along
a line perpendicular to the plane of rotation
the line making an angle of 45o to the plane of rotation
the radius
tangent to the path
23.
24.
If the potential energy of the particle is \(\alpha -\frac { \beta }{ 2 } { x }^{ 2 }\), then force experienced by the particle is
F = \(\frac { \beta }{ 2 } { x }^{ 2 }\)
F = βx
F = -βx
F = -\(\frac { \beta }{ 2 } { x }^{ 2 }\)
25.
Planck's constant (h), speed of light in vacuum (c) and Newton's gravitational constant (G) are taken as three fundamental constants. Which of the following combinations of these has the dimension of length?
\({{\sqrt{hG}}\over{{c}^{{{3}\over{2}}}}}\)
\({{\sqrt{hG}}\over{{c}^{{{5}\over{2}}}}}\)
\(\sqrt{{{hc}\over{G}}}\)
\(\sqrt{{{Gc}\over{{h}^{{{3}\over{2}}}}}}\)
1.
(b)

2.
(c)
8%
3.
(b)
1.457\(\times\)10-2rad
4.
(c)
force
5.
(d)
1:4
6.
(a)
m2/m1
7.
(a)
2Mg/k
8.
(d)
25U
9.
(c)
tan -1\(({1\over \sqrt{3}})\)
10.
(a)
both parts will have numerically equal momentum
11.
(a)

12.
(c)
joule
13.
(b)
[M0L0T0]
14.
(a)
conservation of linear momentum
15.
(c)
motion with constant momentum along a straight line
16.
(a)
Frictional force
17.
(b)
the exerts on the ground
18.
(d)
SI
19.
(b)
momentum
20.
(d)
potential energy
21.
(a)
5.24 m
22.
(a)
a line perpendicular to the plane of rotation
23.
(c)
24.
\(\text {Potential energy } P . E=\alpha-\frac{\beta}{2} x^{2}\)
P.E = Work = Fx
\(P=\alpha-\frac{\beta}{2} x^{2}\)
\(\text {Force }=\frac{d p}{d x}=\frac{d}{d x}\left(\alpha-\frac{\beta}{2} x^{2}\right)\)
\(=0-\frac{\beta}{2} \times 2 x =-\beta x \)
25.
Dimension of Planck's constant is \(\left[\mathrm{ML}^{2} \mathrm{~T}^{-1}\right]\)
Dimension of Gravitational constant is \(\left[\mathrm{M}^{-1} \mathrm{~L}^{+3} \mathrm{~T}^{-1}\right]\)
Dimension of Velocity constant is LT-1
Dimension of Length is L
\(\therefore \text { Dimension of } \frac{\sqrt{h G}}{C^{\frac{3}{2}}}\)
\(=\frac{\sqrt{\left(\mathrm{ML}^{2} \mathrm{~T}^{-1}\right)\left(\mathrm{M}^{-1} \mathrm{~L}^{3} \mathrm{~T}^{-2}\right)}}{\left(\mathrm{LT}^{-1}\right)^{3 / 2}} \)
\(=\frac{\sqrt{\mathrm{L}^{5} \mathrm{~T}^{-3}}}{\mathrm{~L}^{3 / 2} \mathrm{~T}^{-3 / 2}} \)
\(=\frac{\mathrm{L}^{5 / 2} \mathrm{~T}^{-3 / 2}}{\mathrm{~L}^{3 / 2} \mathrm{~T}^{-3 / 2}} \)
\(=\mathrm{L}^{5 / 2-3 / 2} \mathrm{~T}^{3 / 2+3 / 2}=\mathrm{L}^{1} \mathrm{~T}^{0}=\mathrm{L}\)
Dimension of length = L
11th Standard Syllabus & Materials
11th Standard
TN 11th Tamil பீடு பெற நில் - செய்யுள் - காவடிச்சிந்து Important Questions And Answers Study Material - QB365 Set A
NEW11th Standard
TN 11th Tamil பீடு பெற நில் - உரைநடை - மலை இடப்பெயர்கள் : ஓர் ஆய்வு Important Questions And Answers Study Material - QB365 Set A
NEW11th Standard
TN 11th Tamil மாமழை போற்றுதும் - துணைப்பாடம் - யானை டாக்டர் Important Questions And Answers Study Material - QB365 Set A
NEW11th Standard
TN 11th Tamil மாமழை போற்றுதும் - செய்யுள் - ஐங்குறுநூறு Important Questions And Answers Study Material - QB365 Set A
Tamilnadu Stateboard 11th Standard Subjects

Maths

Commerce

Economics

Biology

Business Maths and Statistics

Accountancy

Computer Science

Physics

Chemistry

Maths

Biology

Economics

Physics

Chemistry

History

Business Maths and Statistics

Computer Science

Accountancy

Computer Applications

History

Computer Technology

Commerce

Computer Applications

Computer Technology

Tamil

English

French
Tamilnadu Stateboard Standards