Tamilnadu Board Chemistry Question papers for 12th Standard (English Medium) Question paper & Study Materials

12th Standard Chemistry - Ionic Equilibrium Model Question Paper - by Kala - Bodinayakanur View & Read

  • 1)

    Concentration of the Ag+ ions in a saturated solution of Ag2C2O4 is 2.24 ×10-4mol L-1 solubility product of Ag2C2O4 is

  • 2)

    pH of a saturated solution of Ca(OH)2 is 9. The Solubility product ( Ksp) of Ca(OH)2

  • 3)

    Which will make basic buffer?

  • 4)

    Which of these is not likely to act as lewis base?

  • 5)

    The aqueous solutions of sodium formate, anilinium chloride and potassium cyanide are respectively

12th Standard Chemistry - Chemical Kinetics Model Question Paper - by Kala - Bodinayakanur View & Read

  • 1)

    For a first order reaction A ⟶ product with initial concentration x mol L-1, has a half life period of 2.5 hours. For the same reaction with initial concentration \(\left( \frac { x }{ 2 } \right) \) mol L-1 the half life is

  • 2)

    The decomposition of phosphine (PH3) on tungsten at low pressure is a first order reaction. It is because the (NEET)

  • 3)

    The addition of a catalyst during a chemical reaction alters which of the following quantities? (NEET)

  • 4)

    In a reversible reaction, the enthalpy change and the activation energy in the forward direction are respectively −x kJ mol-4 and kJ mol-1 Therefore , the energy of activation in the backward direction is

  • 5)

    What is the activation energy for a reaction if its rate doubles when the temperature is raised from 200K to 400K? (R = 8.314 JK-1mol-1)

12th Standard Chemistry - Solid State Model Question Paper - by Kala - Bodinayakanur View & Read

  • 1)

    An ionic compound AxBy crystallizes in fcc type crystal structure with B ions at the centre of each face and A ion occupying entre of the cube. the correct formula of AxBy is

  • 2)

    In calcium fluoride, having the flurite structure the coordination number of Ca2+ ion and F- Ion are (NEET)

  • 3)

    The number of carbon atoms per unit cell of diamond is

  • 4)

    CsCl has bcc arrangement, its unit cell edge length is 400pm, its inter atomic distance is

  • 5)

    The radius of an atom is 300pm, if it crystallizes in a face centered cubic lattice, the length oif the edge of the unit cell is

12th Standard Chemistry - Coordination Chemistry Model Question Paper - by Kala - Bodinayakanur View & Read

  • 1)

    The sum of primary valance and secondary valance of the metal M in the complex [M(en)2(Ox)]Cl isL

  • 2)

    An excess of silver nitrate is added to 100ml of a 0.01M solution of pentaaquachloridochromium(III)chloride. The number of moles of AgCl precipitated would be

  • 3)

    IUPAC name of the complex K3[Al(C2O4)3] is 

  • 4)

    A magnetic moment of 1.73BM will be shown by one among the following (NEET)

  • 5)

    In which of the following coordination entities the magnitude of Δ0 will be maximum?

12th Standard Chemistry - Ionic Equilibrium Three Marks Questions - by Saroja - Vellore View & Read

  • 1)

    Define ionic product of water. Give its value at room temperature.

  • 2)

    Explain common ion effect with an example

  • 3)

    Define pH.

  • 4)

    Calculate the pH of 1.5\(\times\)10-3Msolution of Ba(OH)2

  • 5)

    50ml of 0.05M HNO3 is added to 50ml of 0.025M KOH. Calculate the pH of the resultant solution.

12th Standard Chemistry - Electro Chemistry Three Marks Questions - by Saroja - Vellore View & Read

  • 1)

    The conductivity of a 0.01M solution of a 1 :1 weak electrolyte at 298K is 1.5\(\times\)10-4 S cm−1.
    i) molar conductivity ozf the solution
    ii) degree of dissociation and the dissociation constant of the weak electrolyte
    Given that
    \(\lambda^{0}_{catlon}=248.2\quad S\) cm2 mol-1
    \(\lambda^{0}_{anlon}=51.8\quad S\) cm2 mol-1

  • 2)

    Arrange the following solutions in the decreasing order of specific conductance.
    i) 0.01M KCl
    ii) 0.005M KCl
    iii) 0.1M KCl
    iv) 0.25 M KCl
    v) 0.5 M KCl

  • 3)

    Why is AC current used instead of DC in measuring the electrolytic conductance?

  • 4)

    0.1M NaCl solution is placed in two different cells having cell constant 0.5 and 0.25cm-1 respectively. Which of the two will have greater value of specific conductance.

  • 5)

    A current of 1.608A is passed through 250 mL of 0.5M solution of copper sulphate for 50 minutes. Calculate the strength of Cu2+ after electrolysis assuming volume to be constant and the current efficiency is 100%.

12th Standard Chemistry - Surface Chemistry Three Marks Questions - by Saroja - Vellore View & Read

  • 1)

    Peptising agent is added to convert precipitate into colloidal solution. Explain with an example.

  • 2)

    What happens when a colloidal sol of Fe(OH)3 and AS2O3 are mixed?

  • 3)

    What is the difference between a sol and a gel?

  • 4)

    Why are lyophillic colloidal sols are more stable than lyophobilc colloidal sol.

  • 5)

    Addition of Alum purifies water. Why?

12th Standard Chemistry - Transition and Inner Transition Elements Model Question Paper - by Kala - Bodinayakanur View & Read

  • 1)

    Sc( Z=21) is a transition element but Zinc (z=30) is not becaus

  • 2)

    the catalytic behaviour of transition metals and their compounds is ascribed mainly due to

  • 3)

    The alloy of copper that contain Zinc is

  • 4)

    Permanganate ion changes to ________ in acidic medium

  • 5)

    MnO4- react with Br- in alkaline PH to give

12th Standard Chemistry - p - Block Elements - II Model Question Paper - by Kala - Bodinayakanur View & Read

  • 1)

    In which of the following , NH3 is not used?

  • 2)

    The molarity of given orthophosphoric acid solution is 2M. its normality is

  • 3)

    The correct order of the thermal stability of hydrogen halide is

  • 4)

    On oxidation with iodine, sulphite ion is transformed to

  • 5)

    When copper is heated with conc HNO3 it produces

QUARTERLY EXAM - 2019 - by KRP Matriculation Hr Sec School View & Read

  • 1)

    Match items in column - I with the items of column – II and assign the correct code.
     

           Column-I      Column-II
    A. Cyanide process (i) Ultrapure Ge
    B Froth floatation process (ii) Dressing of ZnS
    C Electrolytic reduction (iii) Extraction of Al
    D Zone refining (iv) Extraction of Au
        (v) Purification of Ni
  • 2)

    Which of the following is not true with respect to Ellingham diagram?

  • 3)

    Which of the following is not sp2 hybridised?

  • 4)

    Which one of the following compounds has similar structure to that of graphite?

  • 5)

    Solid (A) reacts with strong aqueous NaOH liberating a foul smelling gas(B) which spontaneously burn in air giving smoky rings. A and B are respectively

12th Standard Chemistry - Chemical Kinetics Three Marks Questions - by Saroja - Vellore View & Read

  • 1)

    The rate of formation of a dimer in a second order reaction is 7.5 X 10-3mol L-1 s-1 monomer concentration. Calculate the rate constant.

  • 2)

    For a reaction x+y+z\(\longrightarrow \) productsthe rate law is given by ratek =k[x]3/2[y]1/2 what is the overall order of the reaction and what is the order of the reaction with respect to z.

  • 3)

    Explain briefly the collision theory of bimolecular reactions

  • 4)

    Write Arrhenius equation and explains the terms involved

  • 5)

    The decomposition of Cl2O7 at 500K in the gas phase to Cl2 and O2 is a first order reaction. After 1 minute at 500K, the pressure of Cl2O7 falls from 0.08 to 0.04 atm. Calculate the rate constant in s-1

12th Chemistry - Solid State Three Marks Questions - by Saroja - Vellore View & Read

  • 1)

    Explain Schottky defect.

  • 2)

    Write short note on metal excess and metal deficiency defect with an example

  • 3)

    Calculate the number of atoms in a fcc unit cell

  • 4)

    Explain AAAA and ABABA and ABCABC type of three dimensional packing with the help of neat diagram.

  • 5)

    Why ionic crystals are hard and brittle?

12th Standard Chemistry - Coordination Chemistry Three Marks Questions - by Saroja - Vellore View & Read

  • 1)

    Give an example for complex of the type [Ma2b2c2] where a, b, c are monodentate ligands and give the possible isomers.

  • 2)

    Give one test to differentiate [Co(NH3)5Cl]SO4 and [Co(NH3)5SO4]Cl.

  • 3)

    In an octahedral crystal field, draw the figure to show splitting of d orbitals

  • 4)

    What is linkage isomerism? Explain with an example

  • 5)

    Write briefly about the applications of coordination compounds in volumetric analysis

12th Standard Chemistry - Transition and Inner Transition Elements Three Marks Questions - by Saroja - Vellore View & Read

  • 1)

    What are interstitial compounds?

  • 2)

    Calculate the number of unpaired electrons in Ti3+ , Mn2+ and calculate the spin only magnetic moment.

  • 3)

    Write the electronic configuration of Ce4+ and Co2+.

  • 4)

    Explain briefly how +2 states becomes more and more stable in the first half of the first row transition elements with increasing atomic number.

  • 5)

    Which is more stable? Fe3+ or Fe2+ - explain.

12th Chemistry - p - Block Elements - II Three Marks Questions - by Saroja - Vellore View & Read

  • 1)

    Give the balanced equation for the reaction between chlorine with cold NaOh and hot NaOH.

  • 2)

    How will you prepare chlorine in the laboratory?

  • 3)

    Give the uses of sulphuric acid.

  • 4)

    Give a reason to support that sulphuric acid is a dehydrating agent.

  • 5)

    Write the reason for the anamolous behaviour of Nitrogen.

12th Chemistry - p - Block Elements - I Three Marks Questions - by Saroja - Vellore View & Read

  • 1)

    Give the uses of silicones

  • 2)

    AlCl3 behaves like a lewis acid. Substantiate this statement.

  • 3)

    Describe the structure of diborane

  • 4)

    Write a short note on hydroboration

  • 5)

    Give one example for each of the following
    (i) icosogens
    (ii) tetragen
    (iii) prictogen
    (iv) chalcogen

12th Chemistry - Metallurgy Three Marks Questions - by Saroja - Vellore View & Read

  • 1)

    Explain zone refining process with an example using the Ellingham diagram given below

  • 2)

    (A) Predict the conditions under which
    (i) Aluminium might be expected to reduce magnesia.
    (ii) Magnesium could reduce alumina.
    (B) Carbon monoxide is more effective reducing agent than carbon below 983K but, above this temperature, the reverse is true –Explain.
    (c) it is possible to reduce Fe2O3 by coke at a temperature around 1200K

  • 3)

    Give the uses of zinc.

  • 4)

    Explain the electrometallurgy of aluminium

  • 5)

    Explain the following terms with suitable examples.
    (i) Gangue
    (ii) slag

12th Standard Chemistry - p - Block Elements - I Model Question Paper - by Kala - Bodinayakanur View & Read

  • 1)

    An aqueous solution of borax is

  • 2)

    The element that does not show catenation among the following p-block elements is

  • 3)

    Oxidation state of carbon in its hydrides

  • 4)

    The geometry at which carbon atom in diamond are bonded to each other is

  • 5)

    The stability of +1 oxidation state increases in the sequence

12th Standard Chemistry - Metallurgy Model Question Paper - by Kala - Bodinayakanur View & Read

  • 1)

    Bauxite has the composition

  • 2)

    Electrochemical process is used to extract

  • 3)

    Zinc is obtained from ZnO by

  • 4)

    Considering Ellingham diagram, which of the following metals can be used to reduce alumina? (NEET-2018)

  • 5)

    Which of the following is used for concentrating ore in metallurgy?

12th Chemistry - Term 1 Model Question Paper - by Kala - Bodinayakanur View & Read

  • 1)

    Roasting of sulphide ore gives the gas (A).(A) is a colourless gas. Aqueous solution of (A) is acidic. The gas (A) is

  • 2)

    Cupellation is a process used for the refining of

  • 3)

    Oxidation state of carbon in its hydrides

  • 4)

    Which of these is not a monomer for a high molecular mass silicone polymer?

  • 5)

    Among the following, which is the strongest oxidizing agent?

12th Chemistry - Chemical Kinetics Two Marks Question - by Saroja - Vellore View & Read

  • 1)

    Define average rate and instantaneous rate

  • 2)

    Define rate law and rate constant

  • 3)

    Derive integrated rate law for a zero order reaction A\(\longrightarrow \) product

  • 4)

    Explain the effect of catalyst on reaction rate with an example

  • 5)

    The rate law for a reaction of A, B and C has been found to be rate =k[A]2[B][L]3/2 How would the rate of reaction change when
    (i) Concentration of [L] is quadrupled
    (ii) Concentration of both [A] and [B] are doubled
    (iii) Concentration of [A] is halved
    (iv) Concentration of [A] is reduced to \(\left( 1/3 \right) \) and concentration of [L] is quadrupled.

12th Chemistry Chapter 6 Solid State Two Marks Question - by Saroja - Vellore View & Read

  • 1)

    Define unit cell

  • 2)

    Give any three characteristics of ionic crystals.

  • 3)

    Differentiate crystalline solids and amorphous solids.

  • 4)

    classify the following solids
    a. P4
    b. Brass
    c. diamond
    d. NaCl
    e. Iodine

  • 5)

    Explain briefly seven types of unit cell

12th Chemistry - Coordination Chemistry Two Marks Question - by Saroja - Vellore View & Read

  • 1)

    Arrange the following in order of increasing molar conductivity
    (i) Mg[Cr(NH3)(Cl)5]
    (ii) Cr(NH3)5Cl]3[CoF6]2
    (iii) [Cr(NH3)3Cl3]

  • 2)

    Based on VB theory explain why [Cr(NH3)6]3+ is paramagnetic, while [Ni(CN)4]2- is diamagnetic.

  • 3)

    Draw all possible geometrical isomers of the complex [Co(en)2]+ and identify the optically active isomer.

  • 4)

    [Ti(H2O)6]3+ is coloured, while [Sc(H2O)6]3+ is colourless- explain

  • 5)

    Name the following complex using IUPAC norms. [Co(en)2 (ONO)CI]CI

12th Chemistry Chapter 4 Transition and Inner Transition Elements Two Marks Question - by Saroja - Vellore View & Read

  • 1)

    Explain the oxidation states of 3d series elements.

  • 2)

    Justify the position of lanthanides and actinides in the periodic table.

  • 3)

    What are actinides? Give three example

  • 4)

    complete the following.
    a. MnO42- + H+ ⟶|?
    b. C6H5CH3 \(\overset { acidified }{ \underset { KMnO_{ 4 } }{ \longrightarrow } } \)?
    c. MnO4- + Fe2+ ⟶?
    d. KMnO4 \(\overset { \triangle }{ \underset { Red\quad hot }{ \longrightarrow } } \) ?
    e. Cr2O72- + I- + H+ ⟶?
    f. Na2Cr2O7 + KCl ⟶?

  • 5)

    Write ionic equation for the reaction between Cr2O7-2 iODS and Fe2+ ions in acidic medium.

12th Chemistry - p - Block Elements - II Two Marks Questions - by Saroja - Vellore View & Read

  • 1)

    What is inert pair effect?

  • 2)

    Give the oxidation state of halogen in the following.
    a) OF2
    b) O2F2
    c) Cl2O3
    d) I2O4

  • 3)

    What are interhalogen compounds? Give examples.

  • 4)

    What is the hybridisation of iodine in IF7? Give its structure?

  • 5)

    How is nitrogen prepared from liquid air?

12th Standard Chemistry Unit 2 p - Block Elements - I Two Marks Questions - by Saroja - Vellore View & Read

  • 1)

    Write a short note on anamolous properties of the first element of p-block

  • 2)

    Describe briefly allotropism in p- block elements with specific reference to carbon

  • 3)

    Give the uses of Borax

  • 4)

    Write a note on Fisher tropsch synthesis

  • 5)

    Give the structure of CO and CO2.

12th Chemistry Unit 1 Metallurgy Two Marks Questions - by Saroja - Vellore View & Read

  • 1)

    What is the difference between minerals and ores?

  • 2)

    What are the various steps involved in extraction of pure metals from their ores?

  • 3)

    Which type of ores can be concentrated by froth floatation method? Give two examples for such ores.

  • 4)

    Describe a method for refining nickel

  • 5)

    What is metallurgy?

12th Chemistry - Term 1 Five Mark Model Question Paper - by Saroja - Vellore View & Read

  • 1)

    Explain the principle of electrolytic refining with an example.

  • 2)

    Give the limitations of Ellingham diagram

  • 3)

    Write a note on zeolites.

  • 4)

    What happens when PCl5 is heated?

  • 5)

    What type of hybridisation occur in
    a) BrF5
    b) BrF3

12th Chemistry Quarterly Model Question Paper - by Saroja - Vellore View & Read

  • 1)

    Bauxite has the composition

  • 2)

    Cupellation is a process used for the refining of

  • 3)

    Boric acid is an acid because its molecule (NEET)

  • 4)

    The molarity of given orthophosphoric acid solution is 2M. its normality is

  • 5)

    The alloy of copper that contain Zinc is

12th Standard Chemistry Unit 7 Chemical Kinetics Book Back Questions - by Saroja - Vellore View & Read

  • 1)

    For a first order reaction A ⟶ B the rate constant is x min−1. If the initial concentration of A is 0.01M , the concentration of A after one hour is given by the expression.

  • 2)

    The addition of a catalyst during a chemical reaction alters which of the following quantities? (NEET)

  • 3)

    In a reversible reaction, the enthalpy change and the activation energy in the forward direction are respectively −x kJ mol-4 and kJ mol-1 Therefore , the energy of activation in the backward direction is

  • 4)

    Assertion: rate of reaction doubles when the concentration of the reactant is doubles if it is a first order reaction.
    Reason: rate constant also doubles

  • 5)

    If the initial concentration of the reactant is doubled, the time for half reaction is also doubled. Then the order of the reaction is

12th Standard Chemistry Unit 6 Solid State Book Back Questions - by Saroja - Vellore View & Read

  • 1)

    Graphite and diamond are

  • 2)

    In calcium fluoride, having the flurite structure the coordination number of Ca2+ ion and F- Ion are (NEET)

  • 3)

    The number of carbon atoms per unit cell of diamond is

  • 4)

    The composition of a sample of wurtzite is FeO0.931.00 what % of Iron present in the form of Fe3+?

  • 5)

    A solid compound XY has NaCl structure. if the radius of the cation is 100pm , the radius of the anion will be

12th Standard Chemistry Chapter 5 Coordination Chemistry Book Back Questions - by Saroja - Vellore View & Read

  • 1)

    The sum of primary valance and secondary valance of the metal M in the complex [M(en)2(Ox)]Cl isL

  • 2)

    IUPAC name of the complex K3[Al(C2O4)3] is 

  • 3)

    Crystal field stabilization energy for high spin d5 octahedral complex is

  • 4)

    Which type of isomerism is exhibited by [Pt(NH3)2Cl2]?

  • 5)

    How many geometrical isomers are possible for<<EVA035.eps>>?

12th Standard Chemistry - p Block Elements - II Book Back Questions - by Saroja - Vellore View & Read

  • 1)

    In which of the following , NH3 is not used?

  • 2)

    P4O6 reacts with cold water to give

  • 3)

    The molarity of given orthophosphoric acid solution is 2M. its normality is

  • 4)

    The correct order of the thermal stability of hydrogen halide is

  • 5)

    Most easily liquefiable gas is

12th Standard Chemistry - Transition and Inner Transition Elements Book Back Questions - by Saroja - Vellore View & Read

  • 1)

    Which of the following d block element has half filled penultimate d sub shell as well as half filled valence sub shell?

  • 2)

    the catalytic behaviour of transition metals and their compounds is ascribed mainly due to

  • 3)

    The correct order of increasing oxidizing power in the series

  • 4)

    Which of the following statements is not true?

  • 5)

    Permanganate ion changes to ________ in acidic medium

12th Standard Chemistry Unit 2 p - Block Elements - I Book Back Questions - by Saroja - Vellore View & Read

  • 1)

    The element that does not show catenation among the following p-block elements is

  • 2)

    Oxidation state of carbon in its hydrides

  • 3)

    Which of the following is not sp2 hybridised?

  • 4)

    AlF3 is soluble in HF only in the presence of KF. It is due to the formation of (NEET)

  • 5)

    The stability of +1 oxidation state increases in the sequence

12th Standard Chemistry Metallurgy Book Back Questions - by Saroja - Vellore View & Read

  • 1)

    In the electrolytic refining of copper, which one of the following is used as anode?

  • 2)

    Which of the following plot gives Ellingham diagram

  • 3)

    In the Ellingham diagram, for the formation of carbon monoxide

  • 4)

    Which of the following reduction is not thermodynamically feasible?

  • 5)

    Which of the following is not true with respect to Ellingham diagram?

12th Standard Chemistry Chapter 1 Metallurgy One Mark Question and Answer - by Saroja - Vellore View & Read

  • 1)

    Bauxite has the composition

  • 2)

    Which of the metal is extracted by Hall-Heroult process?

  • 3)

    Which of the following is commonly used to produce foam in froth floatation process?

  • 4)

    Among the following, one does not belong to calcination, Pick the odd one out.

  • 5)

    Which of the following is incorrect with respect to metallurgy of iron in the blast furnace?

12th Standard Chemistry Unit 7 Chemical Kinetics One Mark Question and Answer - by Saroja - Vellore View & Read

  • 1)

    For a first order reaction A ⟶ B the rate constant is x min−1. If the initial concentration of A is 0.01M , the concentration of A after one hour is given by the expression.

  • 2)

    A zero order reaction X ⟶ XProduct, with an initial concentration 0.02M has a half life of 10 min. if one starts with concentration 0.04M, then the half life is

  • 3)

    The addition of a catalyst during a chemical reaction alters which of the following quantities? (NEET)

  • 4)

    For a reaction, 2A + B ⟶ 3C, The rate of appearance of C at time 't' is 1.2 x 10-4 mol L-1s-1. Identify the rate of reaction.

  • 5)

    For the reaction, 2N2O5 ⟶4 NO2+O2, select the correct statement.

12th Standard Chemistry - Solid State One Mark Question with Answer - by Saroja - Vellore View & Read

  • 1)

    Graphite and diamond are

  • 2)

    An ionic compound AxBy crystallizes in fcc type crystal structure with B ions at the centre of each face and A ion occupying entre of the cube. the correct formula of AxBy is

  • 3)

    The number of unit cells in 8 gm of an element X ( atomic mass 40) which crystallizes in bcc pattern is (NA is the Avogadro number)

  • 4)

    Which of the following is characteristic of ionic solids?

  • 5)

    An example of metal deficiency defect

12th Chemistry - Coordination Chemistry - One Mark Question and Answer - by Saroja - Vellore View & Read

  • 1)

    A magnetic moment of 1.73BM will be shown by one among the following (NEET)

  • 2)

    Crystal field stabilization energy for high spin d5 octahedral complex is

  • 3)

    In which of the following coordination entities the magnitude of Δ0 will be maximum?

  • 4)

    The total number of electrons donated by ligands to platinum ion in [Pt(en)2CI2] is

  • 5)

    Primary and secondary valencies of Cu in [Cu(NH3)4]SO4 is

12th Chemistry Chapter 6 Solid State One Mark Question with Answer Key - by Saroja - Vellore View & Read

  • 1)

    Graphite and diamond are

  • 2)

    In calcium fluoride, having the flurite structure the coordination number of Ca2+ ion and F- Ion are (NEET)

  • 3)

    The number of carbon atoms per unit cell of diamond is

  • 4)

    The ionic radii of A+ and B are 098X10-10 mand 1.81X10-10. m. the coordination number of each ion in AB is

  • 5)

    Which of the following cannot be regarded as molecular solid?

12th Chemistry Unit 4 Transition and Inner Transition Elements One Mark Question with Answer Key - by Saroja - Vellore View & Read

  • 1)

    Sc( Z=21) is a transition element but Zinc (z=30) is not becaus

  • 2)

    The correct order of increasing oxidizing power in the series

  • 3)

    The alloy of copper that contain Zinc is

  • 4)

    In acid medium, potassium permanganate oxidizes oxalic acid to

  • 5)

    Which of the following statements is not true?

12th Chemistry Unit 3 p - Block Elements - II One Mark Question Paper with Answer Key - by Saroja - Vellore View & Read

  • 1)

    In which of the following , NH3 is not used?

  • 2)

    Which is true regarding nitrogen?

  • 3)

    In the brown ring test, brown colour of the ring is due to

  • 4)

    On hydrolysis, PCl3 gives

  • 5)

    P4O6 reacts with cold water to give

12th Chemistry Unit 2 p - Block Elements - I One Mark Question Paper - by Saroja - Vellore View & Read

  • 1)

    An aqueous solution of borax is

  • 2)

    Boric acid is an acid because its molecule (NEET)

  • 3)

    In diborane, the number of electrons that accounts for banana bonds is

  • 4)

    The element that does not show catenation among the following p-block elements is

  • 5)

    Carbon atoms in fullerene with formula C60 have

12th Chemistry Chapter 1 Metallurgy One Mark Question Paper - by Saroja - Vellore View & Read

  • 1)

    Bauxite has the composition

  • 2)

    Which of the metal is extracted by Hall-Heroult process?

  • 3)

    Electrochemical process is used to extract

  • 4)

    Zinc is obtained from ZnO by

  • 5)

    Which of the following is used for concentrating ore in metallurgy?

12th Chemistry Solid State Model Question Paper - by Saroja - Vellore View & Read

  • 1)

    Graphite and diamond are

  • 2)

    In calcium fluoride, having the flurite structure the coordination number of Ca2+ ion and F- Ion are (NEET)

  • 3)

    The ionic radii of A+ and B are 098X10-10 mand 1.81X10-10. m. the coordination number of each ion in AB is

  • 4)

     if ‘a’ stands for the edge length of the cubic system ; sc , bcc, and fcc. Then the ratio of radii of spheres in these systems will be respectively

  • 5)

    Which one of the following crystal has 8: 8 structure?

12th Chemistry Unit 5 Coordination Chemistry Model Question Paper - by Saroja - Vellore View & Read

  • 1)

    The sum of primary valance and secondary valance of the metal M in the complex [M(en)2(Ox)]Cl isL

  • 2)

    A magnetic moment of 1.73BM will be shown by one among the following (NEET)

  • 3)

    How many geometrical isomers are possible for<<EVA035.eps>>?

  • 4)

    Fac-mer isomerism is shown by

  • 5)

    Choose the correct statement

12th Standard Chemistry Chemical Kinetics Model Question Paper - by Saroja - Vellore View & Read

  • 1)

    For a first order reaction A ⟶ B the rate constant is x min−1. If the initial concentration of A is 0.01M , the concentration of A after one hour is given by the expression.

  • 2)

    A zero order reaction X ⟶ XProduct, with an initial concentration 0.02M has a half life of 10 min. if one starts with concentration 0.04M, then the half life is

  • 3)

    The addition of a catalyst during a chemical reaction alters which of the following quantities? (NEET)

  • 4)

    What is the activation energy for a reaction if its rate doubles when the temperature is raised from 200K to 400K? (R = 8.314 JK-1mol-1)

  • 5)

    In a first order reaction \(x\longrightarrow y\) if k is the rate constant and the initial concentration of the reactant x is 0.1M, then, the half life is 

12th Standard Chemistry Chapter 6 Solid State Model Question Paper - by Saroja - Vellore View & Read

  • 1)

    Graphite and diamond are

  • 2)

    The number of carbon atoms per unit cell of diamond is

  • 3)

    The vacant space in bcc lattice unit cell is

  • 4)

    Which of the following cannot be regarded as molecular solid?

  • 5)

    Which of the following is characteristic of ionic solids?

12th Standard Chemistry First Mid Term Model Question Paper - by Saroja - Vellore View & Read

  • 1)

    Bauxite has the composition

  • 2)

    Wolframite ore is separated from tinstone by the process of

  • 3)

    Considering Ellingham diagram, which of the following metals can be used to reduce alumina? (NEET-2018)

  • 4)

    AlF3 is soluble in HF only in the presence of KF. It is due to the formation of (NEET)

  • 5)

    The cation leaves its normal position in the crystal and moves to some interstitial position, the defect in the crystal is known as

12th Standard Chemistry Chapter 4 Transition and Inner Transition Elements Important Question Paper - by Saroja - Vellore View & Read

  • 1)

    Which one of the following ions has the same number of unpaired electrons as present in V3+?

  • 2)

    The magnetic moment of Mn2+ ion is

  • 3)

    Which of the following compounds is colourless?

  • 4)

    Which of the following is wrong with respect to lanthanide contraction?

  • 5)

    Hybridisation of chromium ions and dichromate ions is

12th Standard Chemistry Chapter 3 p - Block Elements - II Important Question Paper - by Saroja - Vellore View & Read

  • 1)

    In which of the following , NH3 is not used?

  • 2)

    Which is true regarding nitrogen?

  • 3)

    An element belongs to group 15 and 3 rd period of the periodic table, its electronic configuration would be

  • 4)

    S-S bond is present in

  • 5)

    Pick the wrong one among the following

12th Standard Chemistry Unit 2 p - Block Elements - I Important Question Paper - by Saroja - Vellore View & Read

  • 1)

    An aqueous solution of borax is

  • 2)

    Boric acid is an acid because its molecule (NEET)

  • 3)

    Which among the following is not a borane?

  • 4)

    Lewis acid character of boron trihalides is as a follows:

  • 5)

    Select the incorrect statement regarding B2H6.

12th Chemistry - Unit 1 Important Question Paper - by Saroja - Vellore View & Read

  • 1)

    Bauxite has the composition

  • 2)

    Roasting of sulphide ore gives the gas (A).(A) is a colourless gas. Aqueous solution of (A) is acidic. The gas (A) is

  • 3)

    Which one of the following reaction represents calcinations?

  • 4)

    Which of the following is not a mineral of aluminium?

  • 5)

    Which of the following is commonly used to produce foam in froth floatation process?

model test question paper for new syllabus state board english medium in chemistry chapter one metallurgy - by Mohan Raj View & Read

  • 1)

    Bauxite has the composition

  • 2)

    Roasting of sulphide ore gives the gas (A).(A) is a colourless gas. Aqueous solution of (A) is acidic. The gas (A) is

  • 3)

    Which one of the following reaction represents calcinations?

  • 4)

    The metal oxide which cannot be reduced to metal by carbon is

  • 5)

    Which of the metal is extracted by Hall-Heroult process?

chemistrty most asked creative five mark questions in chapter one english medium - by Mohan Raj View & Read

  • 1)

    List out the application of aluminum

  • 2)

    List the applications of iron

  • 3)

    How can you separate alumina from silica in a bauxite ore

  • 4)

    What is zone refining? Describe the principle involved in the purification of the metal by this method.

  • 5)

    Write short note on the following:
    (i) The process in which no external reducing agent is used.
    (ii) The process which is used for highly electro positive metal.
    (iii) Write the equation involved in the thermite process.

chapter one creative five mark questions chemistry english medium - by Mohan Raj View & Read

  • 1)

    Explain froth flotation, with diagram.

  • 2)

    Explain concentration by magnetic separation with diagram.

  • 3)

    In the extraction of copper, explain the smelting process.

  • 4)

    Explain refining of nickel by mond's process

  • 5)

    Explain refming of titanium by Van-Arkel method.

english medium stateboard most important five mark questuions in chemistry chapter one metallurgy - by Mohan Raj View & Read

  • 1)

    Describe the role of the following in the process mentioned.
    (i) Silica in the extraction of copper.
    (ii) Cryolite in the extraction of aluminium.
    (iii) Iodine in the refining of Zirconium.
    (iv) Sodium cyanide in froth floatation.

  • 2)

    Explain the principle of electrolytic refining with an example.

  • 3)

    The selection of reducing agent depends on the thermodynamic factor: Explain with an example.

  • 4)

    Give the limitations of Ellingham diagram

  • 5)

    Write a short note on electrochemical principles of metallurgy.

important three mark questions in chemistry metallurgy for state board english medium - by Mohan Raj View & Read

  • 1)

    Write the molecular composition of the following ores and mentions it metal : magnetite) calamine and bauxite.

  • 2)

    (i) Which of the following metals cannot: be extracted by the smelting process : 1 AI, Zn, Fe and Pb. Give reasons.
    (ii) Which one is a good reducing agent (C or CO) for Fe2O3, below 1073 k?

  • 3)

    What is coupling of reaction? How is it useful in metallurgy?

  • 4)

    Explain how the metal oxide is converted into metal using carbon as a reducing agent.

  • 5)

    How oxides of metals are reduced by hydrogen?

chemistry chapter one creative three mark questions for +2 english medium - by Mohan Raj View & Read

  • 1)

    Explain alkali leaching in the extraction of aluminum,

  • 2)

    How is acid leaching done for the sulphide ores?

  • 3)

    Before reduction, the ore is first convertedI into the oxide of metal of interest. Gtve reason

  • 4)

    Explain roasting with an example.

  • 5)

    Explain calcination with an example.

Frequently asked three mark questions chemistry 12th standard unit one metallurgy in chemistry - by Mohan Raj View & Read

  • 1)

    Explain zone refining process with an example using the Ellingham diagram given below

  • 2)

    (A) Predict the conditions under which
    (i) Aluminium might be expected to reduce magnesia.
    (ii) Magnesium could reduce alumina.
    (B) Carbon monoxide is more effective reducing agent than carbon below 983K but, above this temperature, the reverse is true –Explain.
    (c) it is possible to reduce Fe2O3 by coke at a temperature around 1200K

  • 3)

    Give the uses of zinc.

  • 4)

    Explain the electrometallurgy of aluminium

  • 5)

    Explain the following terms with suitable examples.
    (i) Gangue
    (ii) slag

state board english medium chemistry metallurgy Important finding wrong statement questions in chemistry - by Mohan Raj View & Read

  • 1)

    About "Electrolytic refining"
    a) The crude metal is refined by electrolysis.
    b) The rods of impure metal are used as cathode.
    c) Thin strips of pure metal are used as cathode.
    d) Less electropositive impurities removed as anode mud.

  • 2)

    About "Van-Arkel''
    a)Van-Arkel method used for refining Zirconium.
    b) Aluminium is a bad conductor of heat.
    c) Aluminium shows high resistance to corrosion.
    d) Aluminium is a good conductor of heat

  • 3)

    a) Aluminium is used to produce die-castings
    b) Gold nanopartides used as an catalysts
    c) Copper is the first metal used by the human
    d) Brass is an alloy of zinc and copper

  • 4)

    a) Germanium is used as an semi conductor
    b) Stainless steel is an important alloy of Aluminum
    c) Zinc sulphide is used in making luminous paints.
    d) Brass an alloy of zinc is used in water valves

  • 5)

    a) Metallic oxides can be reduced by an alumino thermitc process.
    b) Flux + gangue\(\rightarrow\) slag
    c) Silica gangue present in the ore is basic in nature
    d) Cu2S + FeS \(\rightarrow\)Copper matter

creative two marks questions in +2 chemistry english medium state board chapter one - by Mohan Raj View & Read

  • 1)

    What is metallurgy?

  • 2)

    Why should we have a ecofriendly metallurgical process?

  • 3)

    Name some elements that occur as native elements.

  • 4)

    What is meant by concentration?

  • 5)

    Can the same method of extraction be used for all metals

Creative assertion and reason questions chemistry chapter one english medium twelfth standard - by Mohan Raj View & Read

  • 1)

    Assertion :Aluminium is used in the, design of chemical reactors, : medical equipments, , refrigeration units and gas' pipelines.
    Reason : Aluminium shows high resistance to corrosion
    (a) Both (A) and (R) are true and (R) is the correct explanation of (A)
    (b) Both (A) and (R) are true and (R) is not the correct explanation of (A).
    (c) (A) true but (R) false
    (d) Both (A) and (R) are false.

  • 2)

    Assertion(A) :Metallic zinc is used in galvanising metals such as iron and steel.
    Reason (R) :Zinc is also used to produce die castings
    a) Both (A) and (R) are true and (R) is the correct explanation of (A).
    b) Both (A) and (R) are true and (R) is not the correct explanation of (A).
    c) (A) true but (R) false.
    d) Both (A) and (R) are false.

  • 3)

    Assertion(A) : Zone refining is carried out in an inert gas atmosphere
    Reason (R):The metal is treated with a suitable reagent which can form a volatile compound with the metal.
    a) Both (A) and (R) are true and (R) is the correct explanation of (A).
    b) Both (A) and (R) are true and (R) is not the correct explanation of (A).
    c) (A) true but (R) false.
    d) Both (A) and (R) are false

  • 4)

    Assertion :Cuprite is concentrated by froth floatation process.
    Reason :Cuprite is the sulphide ore
    a) Both assertion and reason are true and the reason is the correct explanation of the assertion.
    b) Both assertion and reason are true but the reason is not the correct explanation of the assertion.
    |c) Assertion is true, but reason is false.
    d) Both assertion and reason are false

  • 5)

    Assertion :Calamine and Dolomite are the Carbonate ores.
    Reason :Calamine is ZnCO3 whereas dolomite is MgCO3.ZnCO3
    a) Both assertion and reason are true and the reason is the correct explanation of the assertion.
    b) Both assertion and reason are true but the reason is not the correct explanation of the assertion.
    c) Assertion is true, but reason is false.
    d) Both assertion and reason are false

English medium twelfth standard most important one mark questions chemistry chapter one metallurgy - by Mohan Raj View & Read

  • 1)

    \(\Delta { G }^{ o }\) vs T plot in the Ellingham's diagram slopes downward the reaction.

  • 2)

    Pick out the alloy that contains a non-metal as a constituent in it

  • 3)

    Ignition mixture used in aluminothermite process is

  • 4)

    Malachite has______ composition.

  • 5)

    Zinc blende is_________

twelfth standard chemistry Chapter one multiple choice creative questions - by Mohan Raj View & Read

  • 1)

    Which metal is used for extraction of Au and Ag and also for galvanisation of iron objects?

  • 2)

    Which of the following is not a mineral of aluminium?

  • 3)

    Which of the following is commonly used to produce foam in froth floatation process?

  • 4)

    Among the following, one does not belong to calcination, Pick the odd one out.

  • 5)

    Which of the following is incorrect with respect to metallurgy of iron in the blast furnace?

mostly asked multiple choice questions in twelfth standard chemistry metallurgy - by Mohan Raj View & Read

  • 1)

    Which of the following statements, about the advantage of roasting of sulphide ore before reduction is not true?

  • 2)

    Match items in column - I with the items of column – II and assign the correct code.
     

           Column-I      Column-II
    A. Cyanide process (i) Ultrapure Ge
    B Froth floatation process (ii) Dressing of ZnS
    C Electrolytic reduction (iii) Extraction of Al
    D Zone refining (iv) Extraction of Au
        (v) Purification of Ni
  • 3)

    Wolframite ore is separated from tinstone by the process of

  • 4)

    Which one of the following is not feasible

  • 5)

    Electrochemical process is used to extract

Chemistry twelfth standard english medium chapter one important one mark questions - by Mohan Raj View & Read

  • 1)

    Bauxite has the composition

  • 2)

    Roasting of sulphide ore gives the gas (A).(A) is a colourless gas. Aqueous solution of (A) is acidic. The gas (A) is

  • 3)

    Which one of the following reaction represents calcinations?

  • 4)

    The metal oxide which cannot be reduced to metal by carbon is

  • 5)

    Which of the metal is extracted by Hall-Heroult process?